How to Flash by Qualcomm Flash Image Loader use QFIL

Today we are going to learn How to flash How to Flash by Qualcomm Flash Image Loader use QFIL. Which is build with Qualcomm chip. This tool are not supported other than Qualcomm mobile phone. Mobile must be capable to enter Download mode.

How to Flash by Qualcomm Flash Image Loader use QFIL

Step 1: Download and Install Qualcomm USB Driver on your Computer step by step.

Step 2: Download and extract Qualcomm Flash Image Loader or QFIL on your computer. Inside the folder, you will be following files as shown bellow picture.

Step 3: Now, open only QFIL.exe as red arrow indicated.

Step 4: Once Qualcomm Flash Image Loader or QFIL properly launched. following option will be in QFIL loader.

Step 5: Now, You should Power Off your Qualcomm device by long pressing power key.

Step 6: Now press Volume Up button and connect your device to the computer during switch off. Now your tool Showing the Qualcomm HS-USB QDLoader 9008 port.

Step 7: Now, In Qualcomm Flash Image Loader or QFIL Click on “Browse” Button and find the downloaded Firmware .mbn that is end with .mdn. this file called mdn file this file only compatable with Qualcomm Flash Image Loader or QFIL downloader.

Step 8: Now select mdn file prog_emmc_firehorse as shown bellow

Step 9: Now wait for loading the selected firmware QFIL will automatically load the require file after fully loaded your firmware your QFIL down-loader are ready for flash.

Step 10: Now press the download button in QFIL to begin the flashing process. Wait for finishing the flashing.

Step 11: This process may be take several minute so please be patient. After successful flashing “All done” massage will be appears and your mobile will be restart automatically.

Now simply disconnect your device and wait for normal mode appear and enjoy.

If you face any difficulty during flash of downloading the flash file please leave a comment.